How to care for your purchase
Leather is a remarkably durable & strong material however you should still avoid getting leather wet or washing it.
Stains on vegetable tanned leather may look harsh at first. Since this leather will patina with time, just letting the leather absorb the stain is usually the best option—although it may take weeks or even months.
If your stain doesn't absorb or you would like to darken the leather apply a thin, even layer of neatsfoot oil. For more extreme darkening use one or a combination of sun exposure and neatsfoot oil.
All Other Leather Colors
Wipe with leather cleaner or a lightly damp & soapy cloth. Then dry with a clean cloth.
After cleaning use a leather conditioner to restore moisture. Gently rub the leather conditioner into your leather with a circular motion using a soft brush, sponge, or microfiber cloth.
Clean gently with a damp microfiber cloth & apply a mixture of warm soapy water. Avoid abrasive scrubbing as this will scratch the surface of the brass. Then dry & polish with a clean microfiber cloth.
Regular cleaning will prevent tarnishing. After cleaning, you may also apply a thin coat of linseed oil or mineral oil with a microfiber cloth to slow the tarnishing process.
Your authentic walnut wood has a natural oiled finish, free of chemicals & dyes. With use and over time, it may lose its luster.
To revive it, wipe with walnut oil & allow it to dry.
*Food grade walnut oil is acceptable
Since we like to leave things as natural as possible and free of chemicals & dyes, our birch wood is unsealed.
Unsealed wood may absorb stains quickly so it is best to act fast if your wood gets a colorful stain by absorbing it with a cloth. Washing can be extremely damaging to unfinished wood. Let the wood dry completely before sanding.
Sanding with a combination of first 100 grit and then 220 grit sandpaper will typically remove surface stains and restore the look and feel. Ensure that you sand with the grain of the wood and never against it.
Handle with care and avoid rough objects that may snag the fibers. In addition, avoid excessive moisture.
To clean dust gently, shake your artwork and or blow out using the blower setting on your vacuum cleaner or canned air. For larger particles ever so gently pluck off with your fingers or tweezers being careful not to catch the fibers.
We use all-natural fibers in our designs including real wool so regular cleaning is important to keep your artwork clean and free of moths. If moths are detected, you should immediately contact your local cleaning and restoration specialist.